Our Services & Products
Scroll down to see our full range
Contact us
Job Vacancies
Auto Electrician/Vehicle Accessory Installer
​
Position: Auto Electrical Installer/Fitter
Location: Bromsgrove & West Bromwich branches
​
​Auto electrical installer/fitter required for the installation of tow bars, vehicle lighting, vehicle security, dash cams. All types of electrical installations i.e. light bars, beacons, interior lights, inverters & split charge systems. Vehicle parking aids, i.e. sensors and cameras. Tracking systems, security cameras, night heaters, fault finding and some diagnostics.
All or most of the above experience is required, but anyone with experience in some of the above will be considered, as training in certain areas can be provided.
​
Work will be carried out mobile at varying locations and at our depots in Bromsgrove and West Bromwich. A fully fitted out van, will be provided and can be used for the purpose of travelling to and from each place of work, so a full clean driving licence is essential. Power tools and any specialist tools will be provided, but candidate would be expected to have all of their own hand tools.
Salary dependent on experience and ability, but highest rates of pay offered.
£30,000 to £35,0000 per annum.
​
To apply please fill out the form below and attach your most up to date CV and stating which position you are applying for.
Trainee Stock Control Coordinator
(Automotive Factors)
Position: Trainee Stock Control Coordinator
Location: West Bromwich branch
As the Trainee Stock Control Coordinator, you will take direction from the Stock Controller. You will be responsible for making sure that stock levels are consistent, ordering new stock if necessary and processing orders. Stock controllers also record and maintain inventory lists, check product codes, review reports and paperwork, and provide customer service. You will be expected to support the Stock Controller by helping with administrative tasks, looking for solutions to issues in inventory and identifying discrepancies. You would also need to check and update stock information daily.
When stock is delivered you will be expected to keep the stock room and office tidy and make sure all stock is put away and recorded and not left out.
Issue parts to Technicians/Fitters as and when required.
There will be some heavy lifting, safety shoes will be provided.
You would answer to the Stock Controller as well as branch management.
-
Checking stock levels regularly
-
Completing the required paperwork when ordering stock
-
Updating stock information on the computer system
-
Comparing items received against items ordered
-
Implementing or improving processes and procedures
-
Managing stock and addressing inventory discrepancies
-
Maintaining records of purchases and other relevant information
-
Performing random checks and audits
You will be based at our West Bromwich branch, so having your own transport or knowledge of local transport networks are important. Being punctual is imperative, your working hours will be 7.30am to 4.30pm, on occasions overtime maybe necessary.
​
To apply please fill out the form below and attach your most up to date CV and stating which position you are applying for.
Van Ply Lining Fitter
​
Position: Van Ply Liner/Fitter
Location: West Bromwich branch
​
Van Ply Liner Fitter​ is required in West Bromwich, West Midlands.
Fitting Ply Lining and Poly Lining kits for commercial vehicles, our customers have a large Fleets that require kits being fit to a very high and professional standard.
You will be based as our West Bromwich branch where our Woodwork Department is. You will be working at varying locations that cover the Midlands Region and beyond when needed. You will report to the Workshop Manager and working as part of a friendly team.
Your Key Responsibilities will Include:
As a Van Ply Liner Fitter your responsibilities will include: Lining and fitting Ply and Poly Lining kits and Bespoke shelving along with some other vehicle accessories to our clients vehicles. Meeting the exact specifications set and completing each job to the highest standards. While at a customer site you will check vehicles for any damage before and after work is carried out.
You are also expected to keep all work spaces while on site and your van tidy and safe at all times.
​
Working Hours: 7.30am - 4.30pm (These can vary at times due to location and nature of the job) (Overtime is offered and at time might be required).
​
Salary is negotiable and dependant on experience and ability, but highest rates of pay offered.
​
To apply please fill out the form below and attach your most up to date CV and stating which position you are applying for.
​
​
​
​
​​​
CNC Machine Operator (Woodwork)
Position: CNC Machine Operator
Location: West Bromwich branch
​
A CNC Operator, or CNC Machinist, oversees operating the computer numerical control (CNC) machine. They produce machined parts according to established parameters and specifications. A CNC Operator also calibrates all machines to their proper operating levels.
You will be responsible for loading sheets of plywood and sometimes other sheet-based materials onto your machine, selecting the correct programme and ensuring cuts are made correctly.
You will then unload your machine and allocate your parts to stock.
You will be based at our Wood Workshop in West Bromwich, so having your own transport or knowledge of local transport networks are important. Being punctual is imperative, your working hours will be 7.30am to 4.30pm, on occasions overtime maybe necessary.
CNC Operator duties and responsibilities include:
A CNC primarily carves and shapes wood. A vital part of their job is ensuring the accuracy of their machinery. The CNC Operator is expected to perform duties and responsibilities that include:
• Using the CNC machine
• Operating industrial machinery
• Fitting the right tools to active machines
• Performing proper set-up and calibration procedures for all equipment and accessories
• Setting tolerance levels and cutting speeds
• Keeping the machine and surrounding areas clean and tidy
• Wearing PPE provided and abide by the health and safety rules
• Heavy lifting is required
Additional duties
• Use of other woodwork machinery such as, chop saws, nail guns, circular saws, jig saws etc.
• Loading offcuts of wood into the furnace
• FLT License would be beneficial but not essential
• General housekeeping
You will report to the Workshop Manager as well as branch management.
To apply, please fill out the form below and attach your most
up to date CV and state which position your are applying for.